SmokingSkillz Posted January 14, 2004 Share Posted January 14, 2004 I have tried electrolising saturated NaCl solution using graphite electrodes where i collected gas at both electrodes. I was expecting green at the anode: a clear gas was produced. Thinking that I had some oxygen I took sniff of it and it stung my nose with a strong chlorine smell. Is the chlorine forming HCl before it makes it to the collector? What is the smelly, colourless gas produced at the anode? (I noticed a slight whitish wispy vapour/gas coming from the solution) How can I make chlorine gas without using MnO2 + HCL or molten NaCl? according to WebElements it can be produced by electrolysing brine. Thanks for any help. Link to comment Share on other sites More sharing options...
JaKiri Posted January 14, 2004 Share Posted January 14, 2004 You don't want to make chlorine. Link to comment Share on other sites More sharing options...
SmokingSkillz Posted January 14, 2004 Author Share Posted January 14, 2004 I am not a nazi or anything, I just wan't to experiment and learn, I was planning on turning the power off once a little was produced, and then maybe reacting it with something like copper or calcium to make it less dangerous. I wan't going to leave it lurking in my bedroom! Link to comment Share on other sites More sharing options...
fafalone Posted January 15, 2004 Share Posted January 15, 2004 We at ScienceForums strongly believe in disseminating dangerous information, stay tuned I'm sure your question will be answered Link to comment Share on other sites More sharing options...
SmokingSkillz Posted January 15, 2004 Author Share Posted January 15, 2004 hmm, well i'm not that fussed about it anyway. I was just wondering why the experiment didn't work as i had expected. I now think i infact made some bleach explaining the smell and no colour. I dont know about the colourless smelly gas though (vapors maybe) Link to comment Share on other sites More sharing options...
YT2095 Posted January 15, 2004 Share Posted January 15, 2004 you`re on the right track for making small amounts of chlorine and the "it stung my nose" bit was most certainly chlorine gas! as for reacting it later, you wouldn`t really notice much of anything happen with copper, if the Calcium you mention is in the form of the element (it`s a metal) then you`ll certainly see it react if you want a load of chlorine, buy a cheap bottle of toilet bleach, empty half of it out and then add an acid into the bottle, you`ll get a litre or 2 of pure chlorine gas without a problem do it outside though, and stay upwind of it, as it`ll knock you on your ass if you get a lungfull! citric or tartaric acid (available at most chemists or wine making shops) will be just fine for the acid to use, but be carefull, it`s nearly invisible, and rather nasty if not controlled Link to comment Share on other sites More sharing options...
aommaster Posted January 15, 2004 Share Posted January 15, 2004 what about vinigar? or is it too dilute? Link to comment Share on other sites More sharing options...
YT2095 Posted January 15, 2004 Share Posted January 15, 2004 never tried it, but I see no reason it shouldn`t, give it a try, let me know [edit] don`t bother, I just tried it, it does work, but it`s a very poor result, the bleach is 5% and so`s the vinigar. you`ll need to shake or heat the vessel to get a significant amount, and even then the Chlorine is a little contaminated due to the vapor pressure of the acetic acid, it`s still good enough to make you choke if you take a good sniff though! LOL Link to comment Share on other sites More sharing options...
aommaster Posted January 15, 2004 Share Posted January 15, 2004 lol YT. hmmm... couldn't u make the ethanoic acid more concentrated, by maybe boiling it and releasing more water? Link to comment Share on other sites More sharing options...
YT2095 Posted January 15, 2004 Share Posted January 15, 2004 Freezing is the better option if your fast, the ice will freeze 1`st, the remaining liquid will be the acetic acid a little more concentrated than before Link to comment Share on other sites More sharing options...
aommaster Posted January 15, 2004 Share Posted January 15, 2004 what about boiling it, doesn't that work as more acetic acid will be there? Or maybe boiling the acetic acid and then condensing it. More like simple distillation! Link to comment Share on other sites More sharing options...
YT2095 Posted January 15, 2004 Share Posted January 15, 2004 you could distill it sure, vingar has a boiling point of roughly 413 kelvin wereas water boils at 373 K. but freezing doesn`t smell as much water freezes at 273 k and acetic acid at about 200k, not many freezers do -73 Celcius and there`s alot less washing up to do after Link to comment Share on other sites More sharing options...
aommaster Posted January 15, 2004 Share Posted January 15, 2004 hmmm.... good point! Link to comment Share on other sites More sharing options...
YT2095 Posted January 15, 2004 Share Posted January 15, 2004 AND! I will point out that anyone trying this is NEVER to use Nitric acid! nitrogen chlorides and or chlorates are unstable and extremely expolosive! you`ve been warned! Link to comment Share on other sites More sharing options...
wolfson Posted January 15, 2004 Share Posted January 15, 2004 The improvement where anolyte containing an aqueous solution of sodium chloride is provided with a concentration by weight of sodium chloride of less than 200 g/l, and the water humidifying the gas containing oxygen is provided sole in the form of water vapour, and maintaining reaction conditions so as to obtain a concentration by weight of sodium hydroxide between the cation-exchange membrane and the cathode of less than 38.8%, which is not bad. Link to comment Share on other sites More sharing options...
Radical Edward Posted January 15, 2004 Share Posted January 15, 2004 fafalone said in post # :We at ScienceForums strongly believe in disseminating dangerous information, stay tuned I'm sure your question will be answered excellent Link to comment Share on other sites More sharing options...
YT2095 Posted January 15, 2004 Share Posted January 15, 2004 faf, does that mean I have permission to post a way to make a small reactor AND where to get the materials from? that even a kid could do! Link to comment Share on other sites More sharing options...
aommaster Posted January 15, 2004 Share Posted January 15, 2004 YT2095 said in NEVER to use Nitric acid! nitrogen chlorides and or chlorates are unstable and extremely expolosive! [/b] hmmm.... i wonder what happens when i light THIS!! lol. Thanx for the warning. Don't worry, im not going to blow up my house! Link to comment Share on other sites More sharing options...
SmokingSkillz Posted January 16, 2004 Author Share Posted January 16, 2004 what about plasma weapons? Link to comment Share on other sites More sharing options...
YT2095 Posted January 16, 2004 Share Posted January 16, 2004 at the risk of sounding dumb, what about plasma weapons? Link to comment Share on other sites More sharing options...
Dudde Posted January 16, 2004 Share Posted January 16, 2004 he wants to know how to make them, most likely AND! I will point out that anyone trying this is NEVER to use Nitric acid! nitrogen chlorides and or chlorates are unstable and extremely expolosive! *sneaks off with a bottle of bleach and a flask of nitric acid* ...where do you live again YT? you and your breathing apparatus Link to comment Share on other sites More sharing options...
YT2095 Posted January 16, 2004 Share Posted January 16, 2004 no probs, GPS coords: N 53^01 .655` W 002^53 .454` ALT 163 feet have fun ) Link to comment Share on other sites More sharing options...
aommaster Posted January 17, 2004 Share Posted January 17, 2004 nice one YT! Link to comment Share on other sites More sharing options...
Guest Fairbank Posted January 18, 2004 Share Posted January 18, 2004 In my hometown of Pullman Washington, (Wash State Univ) our Parks and Rec dept is overrun by brain dead students who get put in charge of filling the city swimming pool. Every few years, they manage to break the chlorine line and evacuate the neighborhood around it, always managing to kill a couple pets and a kid in the park surrounding the pool. I don't think I'd mess with chlorine after going through that every couple of years. Anyone know the freezing point and liquid point of Neon? That came up the other day and Im too lazy to google it Link to comment Share on other sites More sharing options...
aommaster Posted January 18, 2004 Share Posted January 18, 2004 Melting point: 24.553 KELVIN or -248.447 CELCIUS or -415.205 FAHRENHEIT Boiling point: 25.066 KELVIN or -248.048 CELCIUS or -414.5512 FAHRENHEIT Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now