stiles Posted April 23, 2003 Share Posted April 23, 2003 Ok! We're learning how to factor in wind to an airplanes flight plan. I understand (finally) how to find it in a corrected situation. In a non-corrected situation I'm not so sure. Could someone shed some light on this problem.. (test tommorow) Airplane going 500 MPH on a bearing of 260 degrees encounters a 40 MPH wind blowing from 225 degrees. What is the new ground speed needed in order to get to his destination? Link to comment Share on other sites More sharing options...
NSX Posted April 23, 2003 Share Posted April 23, 2003 Originally posted by stiles Ok! We're learning how to factor in wind to an airplanes flight plan. I understand (finally) how to find it in a corrected situation. In a non-corrected situation I'm not so sure. Could someone shed some light on this problem.. (test tommorow) Airplane going 500 MPH on a bearing of 260 degrees encounters a 40 MPH wind blowing from 225 degrees. What is the new ground speed needed in order to get to his destination? Draw both vectors relative to the origin; and mark the angles from the (+) independent axis. ground velocity Velocity someone sees on the ground = air velocity Velocity seen at the cockpit + wind velocity Velocity of the wind. Do a little trig; & Voila! Does that help? Link to comment Share on other sites More sharing options...
stiles Posted April 23, 2003 Author Share Posted April 23, 2003 So itd just be 540 MPH? Link to comment Share on other sites More sharing options...
fafalone Posted April 23, 2003 Share Posted April 23, 2003 Wow, no wonder you couldn't understand my article. Link to comment Share on other sites More sharing options...
stiles Posted April 23, 2003 Author Share Posted April 23, 2003 Well what I really want is help because this is not in the book.. if 540 is right just tell me gosh. anyways, what article are you talkin about? I hope you dont mean that screenname essay. you're right i didnt understand why you would calculate something so incredibly pointless. You act like the mathetmatics for that are difficult or something. Link to comment Share on other sites More sharing options...
fafalone Posted April 23, 2003 Share Posted April 23, 2003 They were sure above your head, since you obviously don't understand the basic trigonometry in your question Why don't you start by drawing a picture of the vectors and their resulting vector. Link to comment Share on other sites More sharing options...
stiles Posted April 23, 2003 Author Share Posted April 23, 2003 All I need to know is if the ground speed is simply 500 mph + 40 mph. I know how to solve triangles with law of sine and cosine to get the bearing. Link to comment Share on other sites More sharing options...
Radical Edward Posted April 23, 2003 Share Posted April 23, 2003 bah, no fluid dynamics Link to comment Share on other sites More sharing options...
Skye Posted April 23, 2003 Share Posted April 23, 2003 All I need to know is if the ground speed is simply 500 mph + 40 mph. That would be the case if the plane was flying straight into the wind but it's flying into the wind at an angle. You just have to draw a triangle as you would to find the bearing, but use it to find the ground speed instead. Link to comment Share on other sites More sharing options...
Radical Edward Posted April 23, 2003 Share Posted April 23, 2003 if you can't do it, just tell the teacher that the physics of the example is completely incorrect. the wind would only apply a force in some direction which the plane would then have to overcome, directionally of course, in addition to the force required to say, maintain it's altitude and velocity. Furthermore with an additional wind speed towards the plane (or with some vector towards the plane) it would generate extra lift, picking the plane up to a higher altitude where the force yould be less. of course this is being entirely pedentic other people are giving useful answers though Link to comment Share on other sites More sharing options...
stiles Posted April 24, 2003 Author Share Posted April 24, 2003 Airplane going 310 MPH on a bearing of 225 degrees encounters a 45 MPH wind blowing from 220 degrees. What is the new air speed and bearing needed in order to get to his destination? I calculated 354.85 MPH for the speed and 224.4 degrees bearing. Could someone confirm these answers to be either correct or incorrect?? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now