Jump to content


Senior Members
  • Posts

  • Joined

  • Last visited

Everything posted by Magnethos

  1. Hi, I want to know why in an electrolitic proccess of the water, the hydrogen obtained is gas. I have seen liquid hydrogen, but I don´t know if is possible to get liquid hydrogen in a non-pressurized bottle.
  2. Hi, recently I have made a Volta´s Battery. This is a simple device that consists on two different metals and a glass of water. Using this procces you can obtain a very little amount of energy. But with the time, the screw oxides because one metal gives electrons to make possible obtain energy. But I have a question, recently I read that you can obtain these electrons from the water instead from the screw. But I don´t know how do it.
  3. I ask this because I haven´t enough basic electrical knowledge. I don´t know if I have explained it well, but I mean this: I have 2 power sources of which one outputs voltage at almost no amperage, and the other outputs amperage at almost no voltage and I want to combine the two to get the combination of voltage and amperage (in the device that is connected to the recharguer cable). Most people say to me that I can´t do that because I can obtain a good amount of volts or a good amount of amperes, but I can´t obtain good amounts of volts and amperes at the same time. I have read that I can recharge a battery using constant voltage or constant amperage. The constant voltage that I need must be 10% to 25% higher than the voltage of the battery and I haven´t problem about obtaining the voltage that I want. But with a good amount of volts but almost not amperage, the time that I must be charging the battery increases a lot. So, I thought... If I´m able to combine one power source that is giving a good amount of volts and another that is giving a good amount of voltage (because with my power cell I can´t get enough amperage and volts at the same time) I can combine the 2 power sources, to get enought amperage and enough voltage. And my question is if I can do that, combine 2 power sources, one with good voltage and almost no amperage, and the other power source with good amperage but almost not voltage, to obtain one power supply that is good amperage and good voltage.
  4. Hi, I want to know if an electromagnet is affected by the voltage or voltage+current. I thought that if the Newman motor runs on voltage, maybe an electromagnet would need only voltage, instead of voltage + current. I use a homemade (screw and copper wire) electromagnet. Anybody knows?
  5. Hi, think for a moment that I have a energy generator... but that generator is giving to me a little amperage (exactly some miliamperes). How can I increase the amperage of the generator? Moving magnets arround or anything similar? I want to get the same voltage, or decrease the voltage minimum as possible.
  6. Look at this: If this possible? High Volts don´t mean hundreds of volts, instead it means more volts than amperes. But I can give the exactly amount to the device of volts and amps. This is possible to do? I have 2 cells, one giving a good amount of volts and the another a good amount of amps
  7. But think that you can recharge the battery because is a rechargeable battery. So, you say that I can recharge a rechargeable battery giving the exact amount of volts, but a very little amperaje (some miliamps). But the time is more... but much more? or simply a little more?
  8. If I have a power source that is giving a good amount of volts, but very little number of amperes... Can I recharge a battery? Or not? Or maybe the proccess will take more time?
  9. Think that I have 2 pack of batteries. In the first pack I have 6 batteries and each battery is giving 1 Volt and 0.01 Amperes, and the second pack of batteries are 2 batteries and each one is giving 0.3 Volts and 1 Amperes. So, we have: First pack 6 Batteries (6(1 Volt, 0.01 Amps)) Second Pack 2 Batteries (2(0.3 Volts, 1 Amp)) Can I obtain 6.6 Volts and 2.06 Amperes, putting all the batteries togheter? I asked the same question to one friend and he told me that I only can get 6.6 Volts at 0.01 or less amps, or obtain 2.06 amps but decreasing the voltage. I have to say that all the batteries are the same kind of battery. Making a serie of parallel connection? How many voltaje would decrease in the second case (when I want the 2.06 amps)?
  10. There is any relation between amperage and the magnetic field?
  11. I want to know what device is shown in this video: What is the name of the sphere device?
  12. I have forgotten to say... The energy is DC and the volts maybe a lot of volts > 1000. The transform must be bigger with high volts and little with low volts?
  13. A transformator... ok. And have you seen a overunity device or some "Strange" device that can give more output amps, maintaining the voltage? I want to say, a amperage amplifier.
  14. Hi, I have a question Suposse that I have a device that produces 500 Volts at 0.1 Amps. There is any device that I can transform that 500 Vols at 0.1 Amps, in higher Amps? I think that if I want to up the Amps, I must lower the Volts? I don´t know if I´m explaning it ok or not. I´m going to put an example: I have 1500 Volts at 0.2 Amps, Can I transform to... 300 Volts at 1 Amp? What device I must to employ to do that?
  15. The project is to make that motor, but without the blades. The mechanism is the same but It won´t be used with air. Instead, another engine will produce the rotary movement to the axle for the "wind" engine. I know that you can say... that´s crazy! because using one motor to run another motor is a nonsense thing, but I only want make that turbine to see (as you have said before) if my idea works.
  16. And I have forgotten to ask if it´s a better motor to get more watt. I mean, another kind of motor/generator, similar to a wind turbine that produces more watts.
  17. I want to build a homemade wind turbine and I would to know what affects to get more or less watts. The size? The wire resistance? Velocity? The number of coils? It´s supposed that I want to get MORE watts. What do you suggest?
  18. The Newman motor is a sham? I only have seen one or two videos. I think that Newman motor is not a perpetual motion machine, it´s instead a device who can work aplying energy... but the mistery is that the more important thing in the motor is the Voltage/Amps ratio. The key is the voltage. The Newman motor runs on volts not on amps. You can increase the volts and maintain the same amps, and the machine will work faster. I don´t know if that is true, but I have heard that. For this reason, you can obtain more energy than then input energy that you give to the machine. Anyone has heard anything about it?
  19. How can be used the magnetic field created by machine to get energy? I mean something like this: In this video a static charge is discharged (used) you can see that in the last part of the video. Can be done the same with the electromagnetic or magnetic field? Based on the Joseph Newman motor, The higher the time constant of your coil, the greater magnetic field you produced for a given power supply. But... that magnetic field can be used to get energy? And another question between em energy and electrostatic energy... Can I transform one kind of energy into another? I say, the electrostatic into em, or the inverse?
  20. Is that possible? And I have a question... when I charge a capacitor... Is possible to use that energy that the capacitor has by using it little by little, or when you discharge a capacitor, the capacitor discharges in the same moment that you use the energy?
  21. Some time ago I heard about Susumu Suzuki, that have been invented a water powered batterie. It seems not be electrolysis. You can find videos on youtube. But, recently I have seen a webpage who sell waterpowered products... Looking at the pictures, it isn´t electrolysis or hidrogen battery... is water battery... Anyone knows any information about it? I have thought to buy one and study how the battery works and replicate it. What do you think about it? http://www.ogormans.co.uk/water_powered.htm
  22. Hi, I have seen a lot of videos of bedini motors, and I always have seen a white plastic where you put the magnets. It seems to be a special plastic. Is a special plastic or it doesn´t matter what kind of plastic do you use?
  23. Here you can find some videos of my experiments: http://www.youtube.com/user/Nonetub Tomorrow I will upload 2 more
  24. I don´t know why wmm crashes, but I think the problem is after instaling quicktime. In a few hours will be uploaded.
  25. Yes, the original idea was put the videos in youtube, but I tried to make a video with windows movie make but the program crashes :S
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.