allmee

When you try to place torque on the bottom it will cancel it all out, study the animation any torque will push up the yellow and black rods, with the green and red gears turning in different directions equaly the blue gear will cancel it out.

try makeing a model to test it.

http://img532.imageshack.us/my.php?image=powerenhancerno4vs6.flv

Different but the same.

The top is powered by hand, motor.

The bottom should cancel any torque placed on it

http://img532.imageshack.us/flvplayer.swf?f=T11843178ir5

No NDA.

Comments are welcome.

I have designed a new device.

http://unlimitedenergy.i8.com/

Please keep comments on the power enhancer.

I was talking about the motor not the ceed devices

Here it is.

http://www.unlimitedenergy.i8.com/

A and B are front view and c is side view.

The system has to be setup with the one pistons teeth all ways on the crank shaft (8 pistons one of the pistons teeth should be connected(teeth for piston 1 are at the right side of the crank shaft teeth for 2 are at the bottom 3 are at the left side and four are at the top)).

c the gears should keep the pistons moveing at the same speed as the crank shaft.

Sorry forgot to add the gears.

I have designed a new crank shaft system and was wondering if people would like to see it. sorry about the math post.

#36

If you look at the shape of the top (which is stationary) the water will go up follow the shape of the top (because the top is stationary and the water is coming out high velocity it will create a vortex) and go back in the center chamber.

if you look at the plans there are propellers that will congest the flow in the main chamber so linear velocity wont be that big of a problem in the center chamber.

#27

The baffle? implying the M shaped "cup" Which is stationary.

If you follow the shape of the baffle the water has nowhere else to go,

Remember the device has to be spun to about 1000rpm by external means

eg, a motor, meaning the water will come out the pipes at high speed.

The water wont deaccelerate to much when it hits the baffle.

The water moves in a continuous flow no brakes.

I have added another plan to the site.

Its http://unlimitedenergy.i8.com/

It starts with the water in there,

Then is spun to about 1000rpm.

Then it will spin on its own.

I have added one more plan.

Its http://unlimitedenergy.i8.com/index.html

Not http://www.unlimitedenergy.com

Its http://unlimitedenergy.i8.com/index.html

NOT http://www.unlimitedenergy.i8.com

I have updated the No.5 invention.

Hopefully its better to understand.

I have updated the site abit.

Maby it is easier to understand.

The spring dosent change the gears keep the tension the same at all times

When th metal stopper locks in place it takes all the tension of the spiring alowing the device to move freely then when it unlocks it uses the tension to get power.

I have added another design

Click the NON-DISCLOSURE AGREEMENT