Jump to content

GaryP

Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by GaryP

  1. I think it would be acceptable because some information I sourced online talks about cathodic protection of steel in concrete and for older buildings which have steel or iron components rusting away inside walls eg https://metallisation.com/applications/cathodic-protection-of-steel-in-concrete/ I think in my circumstance the steel is well protected from the elements anyway and it is really only the 350mm of the beam that inserts into the fabric of the building that is susceptible to possible corrosion. It will be filled over with render and the wall will be re-painted with masonry paint. The render that I removed was bone dry and this was after some very heavy spells of rain so the paint is doing it's job. If what I've proposed will actually work, then I will incoporate it as a belt and braces approach in addition to the zinc primer and bitumen paint.
  2. thanks for the reply. The steel itself is very substantial and the only part of it that "could" get wet is where it enters the fabric of the building (it is primed with zinc phosphate primer and will be painted with bitumen paint). I would try to compare it to a galvanised steel's lifespan.... surely a decent sized block of zinc will be comparable to the amount of zinc used in the plating process and it has the advantage of being able to be renewed? As for new owners, I'd write up what I've done in the house files. I've got a huge file on all the work I've done so far and this could go in the maintenance section, along with an explanation of how it works. As long as it does work, that is the main point. thanks for the reply. If I was to substitute the copper wire for stainless steel, something like rigging wire from a yacht, would that be a better solution?
  3. I have a question that I need help finding the answer to so here goes. When I did chemistry at school back in the early 80's, we were taught about using sacrificial anodes on pipelines etc and as an experiment, I volunteered to take a strip of zinc home and crudely soldered it to a 6" steel nail via a short length of wire and was asked to bury it in the ground for a period of time. When I dug it up some months later, the obvious had happened and I took it back to class to show everyone and much their amazement, the nail showed no sign of rust. Now, I've just installed a steel universal beam as part of an extension to my kitchen and being over enthusiastic, didn't use a galvanised beam (which apparently is a requirement of building regs...oops!) I was told by a structural engineer that if I primed it with zinc phosphate primer and gave it 2 coats of bitumen paint, the officer from the council should accept it (hopefully...) and now comes the question... If I were to attach a length of copper wire to the steel and attach the other end of the wire to a zinc anode and then, bury the anode in almost permanently wet soil close by, would the anode do it's job and protect the steel as if it were galvanised? Any help with the answer to this would be much appreciated, thank you.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.