Blog post: Aman shah: gravitymagnetic

My engine Is not Perpectual and based on the regular laws of physics you read in books,use or see everyday. 

 

Why my engine works and why it is not Perpectual? 

If it does not work,it will prove the regular laws of physics absolutely wrong! 

All the laws of physics used in my engine are already validated to be true!and all those theories are used in other devices 

 

There are three types of theories which can be proposed by a scientist: 

1)theories based on assumptions(assumptions made with doubtable reasons):May be wrong or right:need to be experimentally verified 

2) theories based on well known and well established laws:Always right 

3)Hybrid of 1st and 2nd type 

 

My engine is based on 2nd type! 

To prove my engine works I have to prove that my engine works on regular laws of physics! 

 

Since my engine is based on regular concepts of physics,there is no doubt that it works! 

To check the validity of my engine,you may check the basic analogous principle of operation of my engine! 

 

Now I am going to start making a prototype!I am talking to my college professors for starting this project!And the response is positive! 

Analogous Principle of working of my Non Perpectual gravity engine:

(analogous principle of working means a principle of working Similar to that of the original principle of working) : 

This is "Gravity-Piston Impulse Kinetic Power Technology". 

Let's assume that,you spent energy to take object up,and regain supplied energy when object comes down PLUS gravitational amplification occurs when that object (Lets take example of basket ball)hits a basket ball net with small hole at bottom.When the basket ball hits the net,the net sets in vibration due to IMPULSIVE energy(gravitational amplification) .Assume that the net is piezo electric elastic material which converts impulsive energy to electrical energy!The basket ball net is analogous to 4 flywheels I used in my original engine design.(I use pusher rods to transmit energy to flywheels in my original design). 

Instead of heavy ball,I use heavy pistons and special force distribution technique,not disclosed here. 

I can't disclose the whole concept to general public because I am applying for patent:There are ready diagrams relating to my idea,but i fear some one could copy.Hence,I am explaining my invention through an analogous Example! 

My engine design is inspired from nature,hence there are no chances of failure of my Non Perpectual gravity engine. 

 

So what's according to me is gravity amplification : Additional gravitational energy stored in a descending body when gravity acts on it! 

 

This leads to Impulsive energy transfer! 

 

To be more elaborate, 

gravitational energy which has two components: 

1) energy required to bring heavy object down 2) excessive potential energy 

Applied by gravity which then is converted in to Impulsive energy. 

 

Let's put it this way:take an other example not related to gravity 

engine.Whenever you push door,the door moves further than you intend

to!Why?because of excess energy stored!Now,if u keep any ball in front of 

door on the floor,due to opening/pushing of door,the ball will get impulsive 

energy to move forward! 

 

Yes,that means gravitational energy utilised to pull the ball towards earth 

by the earth's magnetic field is much much more than energy required to lift it! 

 

So gravitational amplification is basically the excess energy gravity stores in a falling body like heavy ball!This can be used as impulsive energy by special and simple technique!Well ifyou are not aware,Impulsive energy is very high integral of sudden energies in a short time! 

I also use a weight distribution technique to get get back both impulsive energy in the form of electrical output as well as the energy needed to lift the piston up. regarding the analogous Principle in Weight and impulse force distribution,please see, 

http://www.flickr.co...N07/6829601232/ 

At first, I intend to produce products only for domestic use and as a camping accessory. I am doing more research for increasing power output so that it can be used in the future in cars. A single cylinder arrangement with 4 flywheels arrangement can produce enough power to power a tube light. 

 

What is the energy source powering my engine? 

 

The fuel is 1)impulsive potential energy component of gravity stored in heavy object if you lift it to a height as well as 2)the other gravity component needed to pull a heavy object towards the earth.You spent 2nd component fully to lift up the heavy object which is again converted to power BUT the other component emerges as the main power output(product). 

Ok,Let me put the initial basic equation in this form: 

 

Impulsive energy converted to electricity by special conversion technique (not disclosed here)PLUS energy to lift the heavy object up recovered PLUS little friction component A=energy given to lift piston PLUS additional potential impulsive energy stored in the heavy body when it is lifted up PLUS little friction component B! 

 

Now, 

The energy to lift the heavy object up recovered=energy given to lift the piston----eq.1) 

 

Use eq.1) in previous equation. 

 

Also,Resultant friction= plus or minus friction component A plus or minus friction component B. 

 

Now, You will get finally as: 

 

Impulsive energy converted to electricity by special conversion technique (not disclosed here)=additional potential impulsive energy stored in the heavy body when it is lifted up PLUS Or MINUS Resultant friction. 

 

You can same equation write in other similar way as: 

 

Impulsive energy converted to electricity by special conversion technique (not disclosed here) PLUS Or MINUS Resultant friction=additional potential impulsive energy stored in the heavy body when it is lifted up. 

 

As you all know you can't make friction zero!Infact friction is one of the Important cause of increase in entropy. Interestingly ,I had heard of new research about magnetic friction less bearing,but I don't know much about this frictionless magnetic bearing. 

 

http://en.wikipedia....agnetic_bearinghttp://adsabs.harvar...APS..NEF.DB003D 

 

Even if I use these bearings,I will not be able to eliminate friction completely! 

Note that the final equation satisfies all known laws of physics and proves that my engine design is not Perpectual.There are few scientist who don't know the meaning of the word "Perpectual".Very few scientists may have invented a gravity engine but called it Perpectual without knowing that their engine could not be Perpectual.And there are only few real inventors ,not many. Also,note thatthis equation represents analogous principle of my engine.I also use a weight distribution technique to get get back both impulsive energy in the form of electrical output as well as the energy needed to lift the piston up. regarding the analogous Principle in Weight and impulse force distribution,please see, 

http://www.flickr.co...N07/6829601232/ 

Note that analogous means similar.Due to patent processing law requirnments ,I am not able to post the exact construction and working of my gravity engine,but it will be available as soon as patent is granted on the Internet. 

 

See http://en.wikipedia.org/wiki/Analogous for more details about analogy. 

Note that I am only converting a form of energy into other,I am not creating energy. 

 

Still some are confused with impulsive energy? 

 

Example: Let us consider that a heavy ball is lifted to and kept on a basket ball catching net with a elastically expandable hole at the bottom.The net is elastic material .Due to gravity,the ball does falls and releases energy back,which was required to lift up(which can be recovered by specially designed mechanical means.).BUT the ball will not simply stop.It will use its excess potential energy to bounce back two to three times before it comes to rest.This bouncing back is actually caused due to impulsive energy due to conversion of additional potential energy into pulses(impulse) which occurs when the floor hits the heavy basket ball again and again(based on newton's law of equal and opposite reaction). 

According to Wikipedia, 

Impulse (physics), in mechanics, something that changes the momentum of an object; the integral of a force with respect to time 

According to Wikipedia, In classical mechanics, an impulse (abbreviated I or J) is defined as the integral of a force with respect to time. When a force is applied to a rigid body it changes the momentum of that body. A small force applied for a long time can produce the same momentum change as a large force applied briefly, because it is the product of the force and the time for which it is applied that is important. The impulse is always equal to the change of momentum. 

More information is also given on Wikipedia.http://en.wikipedia....pulse_(physics) 

 

Just wanted to share this,Please share the below very very important article with as many people as possible: 

 

 

A real gravity /magnetic engine is not a Perpectual motion machine ,considering modern Defination.!I am myself inventing a non -Perpectual gravity engine!People think falsely that gravity and magnetic engines are impossible but it is not true!They are mostly mislead by cheaters claiming to invent Perpectual machines or claiming to invent such engine that are Perpectual for us!These cheaters and non intelluctual conventional minded people have made our scientists life miserable.Very little people believe in us real scientists because of the psycological thinking that gravity / magnetic engines are Perpectual!It seems these people including most professors have stopped thinking the reality and are only bookish.Though complex,the most simplest principle/way to make use of gravity is impulsive energy when a heavy ball falls over a light weight object(Example : basket ball net) in between.I am inventing my own gravity engine based on this impulsive energy concept using proper force distribution and gravitaitional amplification,inspired from nature and flywheels 

Reminding once again:My engine is not Perpectual! 

Don't be dump:Spread awareness about real gravity engines which are not Perpectual!Ask people never get mislead by cheaters claiming to invent Perpectual motion machines!Let me tell you that there might be only 20 real gravity/magnetic engines inventors,all others are cheaters!

I am not posting spam,those cheaters are posting spams! 

The internet community should explain the reality to other people!Dont simply tell people that free energy engines exist:Unless you explain them that these engines are not Perpectual and you can use impulsive energy concept intelligently,no one will believe in us!And try to spread my message to atleast 20 famous websites each of you!Be aware of spams and cheaters like this: 

http://www.lhup.edu/~dsimanek/sge.htm 

and tell people that they are been mislead by such spams!Encourage only real authentic inventors like me!And I wil like to know whether most of you really know what is meant by a"Perpectual motion machine".Please understand the concepts of physics! 

My Non Perpectual engine does not violate any laws of thermaodynamics!Since its not a Perpectual machine! 

If you all will do what I say,the day is not far when your children will see IC engines in museums,and will never go to any fuel filling station!But we only need your effort in right direction,not just some statements which don't explain the reality!A magnetic engine is also possible.Photons compress atomic particles to store compressed energy in them as nuclear energy,but it's not easy to make such engines.It requires a highly intellectual brain! Read and comment on the full post