Erich Posted October 6, 2005 Share Posted October 6, 2005 A New Manhattan Project for Clean Energy Over the past year many luminaries have made clarion calls for a concerted effort to solve the energy crisis. It is a crisis, with 300 million middle class Chinese determined to attain the unsustainable lifestyle we have sold them. Their thirst for oil is growing at 30% a year, and can do nothing but heat the earth and spark political conflict. We have been heating the earth since the agricultural revolution with the positive result of providing 10,000 years of warm stability. But since the Industrial revolution we have been pushing the biosphere over the brink. Life forces have done this before -- during the snowball earth period ( Cryogenian Period ) in the Neoproterozoic toward the end of the Precambrian - but that life force was not sentient! Thomas Freedman of the New York Times has called for a Manhattan Project for clean energy The New York Times> Search> Abstract. Richard Smalley, one of the fathers of nanotechnology, has made a similar plea http://news.uns.purdue.edu/html3month/2004/040902.Smalley.energy.html. We are at the cusp in several technologies to fulfilling this clean energy dream. All that we need is the political leadership to shift our fiscal priorities. I feel our resources should be focused in three promising technologies: 1. Nanotechnology: The exploitation of quantum effects is finally being seen in these new materials. Photovoltaics (PV) are at last going beyond silicon, with many companies promising near-term breakthroughs in efficiencies and lower cost. Even silicon is gaining new efficienies from nano-tech: Researchers develop technique to use dirty silicon, could pave way for cheaper solar energy http://www.physorg.com/news5831.html New work on diodes also has great implications for PV, LEDs and micro-electronics Nanotubes make perfect diodes (August 2005) - News - PhysicsWeb http://physicsweb.org/articles/news/9/8/11 And direct solar to hydrogen, I was told they have hit 10% efficiency and solved mass production problems: Hydrogen Solar home http://www.hydrogensolar.com/index.html And just coming out of the lab, this looks very strong, it brings full spectrum efficiencies to PVs: UB News Services-solar nano-dots http://www.buffalo.edu/news/fast-execute.cgi/article-page.html?article=75000009 1a. Thermionics: The direct conversion of heat to electricity has been at best only 5% efficient. Now with quantum tunneling chips we are talking 80% of carnot efficiency. A good example is the proposed thermionic car design of Borealis. ( http://www.borealis.gi/press/NEW-GOLDEN-AGE-IBM.Speech.6=04.pdf ) . The estimated well-to-wheel efficiency is over 50%. This compares to 13% for internal combustion and 27% for hydrogen fuel cells. This means a car that has a range of 1500 miles on one fill up. Rodney T. Cox, president of Borealis, has told me that he plans to have this car developed within two years. Boeing has already used his Chorus motor drives http://www.chorusmotors.gi/. on the nose gear of it's 767. (Boeing Demonstrates New Technology for Moving Airplanes on the Ground http://www.boeing.com/news/releases/2005/q3/nr_050801a.html ) The Borealis thermocouple power chips http://www.powerchips.gi/index.shtml (and cool chips) applied to all the waste heat in our economy would make our unsustainable lifestyle more than sustainable. You may find an extensive discussion on thermo electric patents at: Nanalyze Forums - Direct conversion of heat to electricity http://www.nanalyze.com/forums/topic.asp?TOPIC_ID=1006 2. Biotechnology: Since his revolutionary work on the human genome project, Craig Venter has been finding thousands of previously unknown life forms in the sea and air. His goal is to use these creatures to develop the ultimate energy bug to produce hydrogen and or use of their photoreceptor genes for solar energy. http://www.venterscience.org/ Imagine a bioreactor in your home taking all your waste, adding some solar energy, and your electric and transportation needs are fulfilled. 3. Fusion: Here I am not talking about the big science ITER project taking thirty years, but the several small alternative plasma fusion efforts and maybe bubble fusion - Is bubble fusion back? (July 2005) - News - PhysicsWeb http://physicsweb.org/articles/news/9/7/8 ) On the big science side I do have hopes for the LDX : http://psfcwww2.psfc.mit.edu/ldx/. . There are three companies pursuing hydrogen-boron plasma toroid fusion, Paul Koloc, Prometheus II, Eric Lerner, Focus Fusion and Clint Seward of Electron Power Systems http://www.electronpowersystems.com/ . A resent DOD review of EPS technology reads as follows: "MIT considers these plasmas a revolutionary breakthrough, with Delphi's chief scientist and senior manager for advanced technology both agreeing that EST/SPT physics are repeatable and theoretically explainable. MIT and EPS have jointly authored numerous professional papers describing their work. (Delphi is a $33B company, the spun off Delco Division of General Motors)." and "Cost: no cost data available. The complexity of reliable mini-toroid formation and acceleration with compact, relatively low-cost equipment remains to be determined. Yet the fact that the EPS/MIT STTR work this technology has attracted interest from Delphi is very significant, as the automotive electronics industry is considered to be extremely demanding of functionality per dollar and pound (e.g., mil-spec performance at Wal-Mart-class 'commodity' prices)." EPS, Electron Power Systems seems the strongest and most advanced, and I love the scalability, They propose applications as varied as home power generation@ .ooo5 cents/KWhr, cars, distributed power, airplanes, space propulsion , power storage and kinetic weapons. It also provides a theoretic base for ball lighting : Ball Lightning Explained as a Stable Plasma Toroid http://www.electronpowersystems.com/Images/Ball%20Lightning%20Explained.pdf The theoretics are all there in peer reviewed papers. It does sound to good to be true however with names like MIT, Delphi, STTR grants, NIST grants , etc., popping up all over, I have to keep investigating. Recent support has also come from one of the top lightning researcher in the world, Joe Dwyer at FIT, when he got his Y-ray and X-ray research published in the May issue of Scientific American, http://www.sciam.com/article.cfm?chanID=sa006&colID=1&articleID=00032CE5-13B7-1264-8F9683414B7FFE9F Dwyer's paper: http://www.lightning.ece.ufl.edu/PDF/Gammarays.pdf and according to Clint Seward it supports his lightning models and fusion work at Electron Power Systems Clint sent Joe and I his new paper on a lightning charge transport model of cloud to ground lightning (he did not want me to post it to the web yet). Joe was supportive and suggested some other papers to consider and Clint is now in re-write. It may also explain Elves, blue jets, sprites and red sprites, plasmas that appear above thunder storms. After a little searching, this seemed to have the best hard numbers on the observations of sprites. Dr. Mark A. Stanley's Dissertation http://nis-www.lanl.gov/~stanleym/dissertation/main.html And may also explain the spiral twist of some fulgurites, hollow fused sand tubes found in sandy ground at lightning strikes. lightning produces thermonuclear reaction This new work By Dr.Kuzhevsky on neutrons in lightning: Russian Science News http://www.informnauka.ru/eng/2005/2005-09-13-5_65_e.htm is also supportive of Electron Power Systems fusion efforts http://www.electronpowersystems.com/ . I sent it to Clint Seward and here's his reply: "There is another method to producing neutrons that fits my lightning model that I have described to you. It is well known that electron beams have been used extensively to produce neutrons, above electron energies of 10 MeV, well within the voltages reported in the lightning event. (An Internet search produced several articles that reported this). I do not pretend to have researched this extensively, and do not know the actual target molecules or the process, but it appears plausible from what the papers report, and is consistent with my lightning model. The proposed method you sent to me is a lot more complex, and I would have to say I can not agree with the article as written without experimental results." Here's an email that is very good news for Paul Koloc's and Eric Lerner's work on P-B11 fusion. He's referring to a power point presentation given at the 05 6th symposium on current trends in international fusion research , which high lights the need to fully fund three different approaches to P-B11 fusion . 1.) Prometheus II , 2.) Field Revered Configuration, and 3.) Focus Fusion http://www.focusfusion.org/about.html It's by Vincent Page a technology officer at GE. Email me and I'll send it to anyone interested. from : Paul M. Koloc; Prometheus II, Ltd.; 9903 Cottrell Terrace, | Silver Spring, MD 20903-1927; FAX (301) 434-6737: Tel (301) 445-1075 | Grid Power -Raising $$Support$$ -;* http://www.neoteric-research.org/ | http://www.prometheus2.net/%A0%A0%A0------ mailtopmk@plasmak.com "Erich, Thanks for your update, A friend of mine, Bruce Pittman, who is a member of the AIAA, recently sent me a copy of the attached paper by Vincent Page of GE. Please keep in mind that I have never communicated with Vincent, but he found our concept to have the highest probability of success for achieving a commercial fusion power plant of any that he examined. A program manager at DARPA submitted a POM for sizeable funding of extended research on our concept, both here and at Los Alamos National Laboratory. However, it didn't stay above this year's cut line for the budget funding priorities. BTW, I agree with Cox that the analysis done by Chen does not fit the criteria of the EST plasmoid that Clint produces. The poloidal component of current in his toroid dominates his topology, which means that the corresponding toroidal field, which is only produced within the torus, also dominates. Consequently, the outward pressure on the EST current shell must be balanced by some external inward force. The toroidal component of current is weak and cannot produce the external poloidal magnetic pressure that would bring the toroid into stable equilibrium. If the plasmoid lasts for .6 seconds without change of shape or brightness level, then it must be continuously formed with his electron beam source. Otherwise, the plasma would decompose within microseconds. By comparison, our PLASMAK magnetoplasmoids (PMKs) have negligible change in shape, size or luminosity over a period of one or two hundred milliseconds after the initial tens of microseconds impulse that forms them has ceased. That may not sound like much of a lifetime, but compare that to the decomposition of Lawrence Livermore's spheromak plasma within 60 microseconds. The other interesting thing is that we have recently produced PMKs of 40 cm diameter (under work sponsored by DOD), and with the installation of our new, additional fast rise capacitors, we expect to obtain lifetimes of seconds. Cheers, Paul " The learning curve is so steep now, and with the resources of the online community, I'm sure we can rally greater support to solve this paramount problem of our time. I hold no truck with those who argue that big business or government are suppressing these technologies. It is only our complacency and comfort that blind us from pushing our leaders toward clean energy. Erich J. Knight shengar@aol.com (540) 289-9750 Link to comment Share on other sites More sharing options...
Sayonara Posted October 6, 2005 Share Posted October 6, 2005 Stop duplicating this thread. Link to comment Share on other sites More sharing options...
Recommended Posts