Jump to content

preparation of nitrogen


the guy

Recommended Posts

I need to produce a nice steady stream of pure nitrogen for and experiment.

 

Could anyone suggest the easiest (both in method and in availability of materials/chemicals) and safest method for preparing nitrogen for this?

 

thanks in advance

Link to comment
Share on other sites

Combine a dilute solution of sodium nitrite (any nitrite, actually) with an ammonium salt, then very slowly heat the solution until the rate which the nitrogen is produced is fast enough (overshooting with the heat can lead to vigorous decomposition, even explosion).

 

Combining ammonia solution with calcium hypochlorite will also produce nitrogen, but it will be contaminated with large amounts of chloramine.

Link to comment
Share on other sites

Normal people get liquid nitrogen from sellers and let it evaporate as needed. It's naturally clean, cheap. Borrow some from the next university or lab. You might obtain it gaseous in a pressure bottle as well.

 

I wouldn't consider chloramine as safe, since it's a precursor to hydrazine. Nitrite neither.

Link to comment
Share on other sites

Normal people get liquid nitrogen from sellers and let it evaporate as needed. It's naturally clean, cheap. Borrow some from the next university or lab. You might obtain it gaseous in a pressure bottle as well.

 

I wouldn't consider chloramine as safe, since it's a precursor to hydrazine. Nitrite neither.

 

Sure, chloramine isn't the safest thing around, but it's not extremely toxic either. Hydrazine can only be made from chloramine under special conditions (with a large excess of ammonia, low temperatures, and chelators or thickening agents). Simply working outside solves the problem of accidentally being gassed by chloramine. But if the nitrogen is used for inert gas purposes, this method won't work because chloramine is too reactive.

 

As for nitrites, wear gloves and safety goggles, and you're pretty much good. Again, it's not extremely toxic. The chances of an explosion is slim if the solution of nitrite+ammonium salt is kept dilute, even if you just cranked the heat up. With a dilute solution and careful, slow heating, the possibility of an explosion is almost non-existent.

Link to comment
Share on other sites

I need to produce a nice steady stream of pure nitrogen for and experiment.

 

Could anyone suggest the easiest (both in method and in availability of materials/chemicals) and safest method for preparing nitrogen for this?

 

thanks in advance

Buy it.

Just get a nitrogen cylinder (it's essentially a pressurized bottle of nitrogen) with a gas pressure regulator.

 

This is the method that everybody uses in the lab. Nobody makes nitrogen.

 

Nitrogen is essentially a waste product from oxygen production (which is what alpha2cen described in the post above) - and it's pretty cheap. Renting the cylinder and the regulator, as well as delivery to wherever you need it, may still result in some costs.

Link to comment
Share on other sites

Other method is PSA(pressure swing adsorption) method. This method uses MSC(molecular sieving carbon). MSC contains very small nano pores in it. Large molecules movement in the pore are more slow than small molecules for their size.

Edited by alpha2cen
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.