Jump to content

Concentrated magnetic field to accomplish diamagnetism capable of suspending water


TimeContinuum

Recommended Posts

Hey guys, I'm going to be building a type of coil which I believe is capable of concentrating magnetic force waves with more laser beam like precision just figured I'd start a thread on the idea. I'll post some pictures of my experimentation and maybe throw up some diagrams as I draw them. If anybody has any questions, suggestions or experience they'd like to share with me, I'll be constructing my first proof of concept in the next 2 days.

 

 

My goal with the first device is to accomplish beam like characteristics in magnetic force.

 

Here's a 0.8 Watt Electromagnet for you to look at in the mean time, it will be my point of reference when comparing efficiencies of field:

SApn5.jpg

 

 

 

Some reading:

http://en.wikipedia....lectromagnetism

http://en.wikipedia....ki/Phase_(waves)

http://en.wikipedia....i/Dipole_magnet

http://en.wikipedia.org/wiki/Helix

http://www.popsci.com/scitech/article/2009-09/nasa-levitates-mouse

Edited by TimeContinuum
Link to comment
Share on other sites

2 layers wrapped around iron core, 104 turns

Operating at 2.4V, 18A, max range of 2 1/4" (43.2 Watts, heats significantly, not too hot to handle, but wouldn't leave unattended)

 

QRPoRh.jpg

 

 

 

1 layers wrapped around 6 iron core, aligned parallel, 52 turns per core, 312 turn total

Operating at 2.4V, 8.5A, max range of 4" (20.4 Watts, better power handling because of difference in turns, will need to introduce more controls into next experiment)

34S2qh.jpg

 

Conclusion

Although the controls could be improved, double my magnetic range with less than half power cannot be ignored. Am going to skip forward to more advanced testing next.

 

NEXT UP

Very high voltage pulse arrays.

Parts to get:

- 10 AWG single stranded wire

- Strip old breaker box of copper bars

- 0/4 AWG wire

- 10KV 2300pF vacuum capacitor

- 2X parabolic satellite dishes

- Power Supply or transformer to charge 10KV capacitor

 

2 different arrays to test

- Radials

- Dipole Array

 

TO DO

- Engineer both array configurations to same power handling, radial array will have much longer elements.

 

Additional Notes

- Don't expect anything Earth shattering on this small of a scale, but results of an extremely high-powered EMP:

- My radial array will be tuned to a specific UHF frequency, so after pulse tests, I will add a cavity, and attempt more of a single-point, short-range, UHF laser, with the addition of an oscillating power transmitter (do have readily available :D)

Edited by TimeContinuum
Link to comment
Share on other sites

Got most parts I'll need.

 

Also I'm abandoning the Dipole Array configuration for the moment because I feel the results will be fairly predictable. Changing my approach to wiring the coil as sort of "wave shaping".

 

I've decided to start my website back up to track my progress on there. Anybody interested in following it can check it out at:

 

http://www.eirhead.com

 

I got it set to auto-notify facebook for me, and I like keeping my friends up to date on my experiments, haha.

Link to comment
Share on other sites

  • 6 months later...

Got most parts I'll need.

 

Also I'm abandoning the Dipole Array configuration for the moment because I feel the results will be fairly predictable. Changing my approach to wiring the coil as sort of "wave shaping".

 

I've decided to start my website back up to track my progress on there. Anybody interested in following it can check it out at:

 

http://www.eirhead.com

 

I got it set to auto-notify facebook for me, and I like keeping my friends up to date on my experiments, haha.

 

hello Erich.

I am trying to concentrate a magnetic field running at 10Mhz. I have built a toroid around the inductive load of the final stage which I can load to about 200Watts.

The diameter of the coil is about 25mm and is wound on a PVC former with 22 of 10mm X 100mm toroid bars running the length of coil. I believe that this arrangement concentrates the field within the coil. Can you think of any way in which I can alter the pattern.

Ta, Nanobill.

Link to comment
Share on other sites

  • 3 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.