Jump to content

Simple basic thermodynamics


Externet

Recommended Posts

Hello everyone.

Simple condensation does not happen :

 

A bottle ¾ filled with water kept hot (~60°C).

On top of it, another bottle upside down kept at ambient temperature, coupled neck to neck with adhesive tape, forming a shape sort of an hourglass.

 

No condensation happens in the internal walls of the upside down top cool bottle, even after hours.

 

Why ? What is missing ? How can condensation be achieved ? :confused:

 

VERY easy to try and confirm by yourself !

 

Miguel

Link to comment
Share on other sites

Given T1 = 333K, (RH)1 = 75%, and p1 = 1atm.

 

>From this information, at state 1:

 

(p)v = [(p)sat][(RH)1], where (p)sat corresponds to 333K.

 

With (p)v at state 1 and p1 = 1atm, the humidity

 

ratio w1 can readily be calculated. Verify that

 

w1 = 0.01095

 

If there is no condensation, then w2 = w1.

Link to comment
Share on other sites

the temperature diferential is only 35c to start with, then you have to factor in the appature through which the vapor molecules must pass, it would take days at that exchange rate to see a noticable effect. nice try though! :)

Link to comment
Share on other sites

Hello YT2095

Would had been a nice try if some results were obtained.

The aperture is narrow, yes. Solar stills with plain flat glass do produce a respectable amount of drinking water with the same temperature differential. No bottlenecks there.

 

The intention is to find a distilling application recycling the zero cost PET disposable beverage bottles, for the third or fourth world to get some drinking water using many of these contraptions.

 

The bottom sun exposed bottle is flat flack, the necks mating has a condensate collection ring and aquarium hose outlet. All that seems fine.

 

Ideas to make the vapors rise to the upper bottle are needed. Maybe venting the top bottle as in distilling colums would help by producing a tiny agitation of the water surface ¿? :-(

 

Miguel

Link to comment
Share on other sites

  • 2 weeks later...

Here's my speculation:

In a closed environment such as this what you shall only witness is expansion/contraction within said environment. A tertiary factor must be introduced in order to achieve a third-degree reaction (water condensation).

Try a decent pin prick somewhere on the upper bottle.

 

You must've sealed the two necks beautifully with tape.

Link to comment
Share on other sites

It's more likely that the condensing vapour descended before settling on anything because its density changed, as you see between the panes of double-glazed windows that weren't properly evacuated before being sealed.

 

The hottest water vapour will always rise above the coolest.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.