# The meter-second (moved from general discussion)

## Recommended Posts

Ever since learning to integrate in high school Calculus, I've been curious as the the physical meaning of the integral of position w/ respect to time. Over the years, the topic has come up again and again in my mind, and have finally decided to put an end to my pondering; or at least let others ponder with me.

Is there any firm grasp of the concept of the meter-second already in existence? Is there a good use for this?

I have come to call the integral of position wrt time "longevity" as that seems to be the best term in my mind to describe it. From what I have been able to determine with some simple thinking is that longevity can be related to amount of energy or force placed on object in a gravitational field (ie. if you put a high amount of kinetic energy on an object, it will have a larger longevity than if you put a small amount of kinetic energy on an object).

Any thoughts on this?

##### Share on other sites

...

Any thoughts on this?

you ask for ANY thoughts' date=' zebov.

I assume that includes any random thoughts. So here are one or two random reactions.

The meter second is the unit needed to express this combination of fundamental constants

G h-bar/c[sup']4[/sup]

Just for practice I will write the same thing in tex (if it works today)

$\frac{G \hbar}{c^4}$

Now this G/c4 is the coefficient in the Einstein equation, the main equation of General Relativity. Sometimes in Gen Rel the units are adjusted so that G/c4 = 1

this makes the Einstein equation look nice. If that were done, then what you are talking about, namely the unit of

G h-bar/c4, is the same as the unit of h-bar itself. That is, the unit of ACTION.

Ordinarily action is [energy x time], but setting G/c4 = 1 has the effect of identifying energy with distance...so it becomes [length x time].

h-bar is also the unit of UNCERTAINTY in the Heisenberg uncertainty relation.

But adjusting the units that way will totally get you out of the metric system. It seems like a pointless thing to do unless you have some good reason.

Now that i think more about it, I don't know of any everyday physics quantity that would be measured in meter-second. Could be something in some obscure branch of hydraulics or meteorology . Did you look it up in google?

##### Share on other sites

i have been wondering about the meter second for a few weeks now as well....stupid calculus...

##### Share on other sites

I've tried googling, but to no avail. Even had some discussion with some smart university-type grad students. I did receive a good response from Tom Mattson explaining WHY no one is particularly interested in it (because energy is based of position and velocity, and that's what we humans care about) (http://www.scienceforums.net/forums/showthread.php?t=18440). However, I'm still curious as to if there could possibly be any useful physical meaning in some branch of science.

I thought there may be some sort of connection to relativity, because it's in essence making space and time a comparable entity saying "5 meters for 1 second is the same as 1 meter for 5 seconds."

##### Share on other sites

...

I thought there may be some sort of connection to relativity' date=' because it's in essence making space and time a comparable entity saying "5 meters for 1 second is the same as 1 meter for 5 seconds."[/quote']

you are pushing us to be creative, zebov.

I'm afraid you won't necessarily be pleased with the results:-)

the danger to a diver of nitrogen poisoning or "the bends" is proportional to the time he works under water. working 5 hours is more risky than working one hour

it is also proportional to the DEPTH he is working, work at 50 meters is 5 times more dangerous and requires 5 times more precaution when coming to the surface than working at 10 meters

so we have a integrated nitrogen burden that we calculate, say, where

if he works for FIVE HOURS AT 10 METERS that is 50 points and it is just as bad as working ONE HOUR AT 50 METERS---which also gets 50 points

after the job, the accumulated burden determines what he has to do when coming to the surface, and how soon he will be allowed to make a second dive. There are precautions that one can take like gradual surfacing, by stages, and breathing a different mixture, and so on.

Actually, zebov, I have done some SCUBA and several times we had "dive computers" on our wrists which were like FAT WRISTWATCHES and were always integrating time and depth.

After being down deep for a long time, the "dive computer" would warn us if we were coming up too fast, and it would warn us not to make a second dive that day if we had born too much Nitrogen load. It did not want us to come up too fast etc etc.

you can say it was integrating time with PRESSURE (not depth) because that is what matters. at higher pressure the nitrogen disolves into the blood more rapidly.

##### Share on other sites

It could be of us as a transitional or converting unit. I don't see any practical reason for it.

##### Share on other sites

In theory, couldnt every physical movement be measured in meter-seconds, as we are all actually moving in 4 dimensions??

##### Share on other sites

In theory, couldnt every physical movement be measured in meter-seconds, as we are all actually moving in 4 dimensions??

Well, every position can be expressed in terms of meter; every speed/velocity in terms of meter/second; every acceleration in terms of meter/second^2. However, one cannot determing a position from a given speed; nor can you determine a speed from a given position.

The question is, is there any application of measuring "longevity" (in meter-seconds). The post above about diving is one such application where position, velocity, or any of their derivatives are unimportant... the important thing is the "longevity" (actually, it's a pressure-time measurement, but this can be derived from the position-time measurement). Does anyone else have any valid applications of the meter-second?

##### Share on other sites

if there was any use for it, it would already be used in physics and probably engineering. i'm sure that in the 300 years of calculus some physicist has asked the question.

##### Share on other sites

Aye, that is what I thought as well; however, I wasn't able to find ANY reference to it, so I thought I'd ask around and get others' ideas. To me, this is not a dumb question, but rather and interesting idea. The answer "noone has done anything with it and I'm sure someone has tried" is not enough for me... lest nothing ever be researched and, thus, the halt of scientific development.

I very much appreciate the answers I have received, though. Esp. regarding its lack of usefullness in calculating Energy and its possible use in diving. Answers of this nature are much more informative than "i'm sure that questions been asked before, so it must not be something we should look into."

##### Share on other sites

• 9 years later...

This is a fascinating question that I'm sure has puzzled many calculus and physics students. The best explanation comes from understanding what happens geometrically when we integrate. For example, the integral of a volume is an area, the integral of an area is a displacement, thus the integral of a displacement is a point. The ideas associated with considering the unit of the meter second as a unit of spacetime are valid.

The integration of the displacement equation gives an infinitessimally small point in spacetime that can be thought of as a coordinate. Some might consider such a point to be a "singularity". Nevertheless, the idea is useful for allowing us to place a clock at each one of those points, so that we can analyze concepts such as time dilation due to the constancy of the speed of light, and the so called "cosmic speed limit". So think of it this way, the integral of a displacement yields a point in spacetime.

##### Share on other sites

• 11 months later...

It is the denominator of viscosity: kg/m.s

##### Share on other sites

• 1 year later...

The G x h-bar does not result in m*s, it result in s, even in GR by setting G/c^4 to 1 results in m*s^2/Kg

the meter*second is a failed use of the derivation of 'length contraction,' where invariably the confused scientists cone to a point in the derivation such that L x T = l' x t'

Thus they inadvertently can get to L/t'=l'/T and it's all downhill from there.

The problem is, if you use length contraction, l't' is always equal to 1.  So the reason they are able to derive the bizarre inept result of length contraction is because they have '1' on the other side of the equal sign, which allows them to commit all kinds of tom foolery.

Length dilates, just as time dilates:

That is, if length contracts and time dilates, at v=c, c=0. In fact, c is variable across the spectrum.

However if we dilate length:

And the c is preserved and constant.

dr wjb

##### Share on other sites

• 1 month later...

The meter second is the unit for absement, the antiderivative of displacement.

##### Share on other sites

11 minutes ago, Its_physics_my_dude said:

The meter second is the unit for absement, the antiderivative of displacement.

Which leads  to the discovery of this little lot.

##### Share on other sites

• 1 month later...

The meter-second is equal to angular momentum divided by force and describes over what distance and how long a given quantity of angular momentum can exert a given force.

m.sec=kg.m^2/sec / kg.m/sec^2

In that regard, 5 meters in one second IS the same as 1 meter for 5 seconds, because both refer to the same angular momentum divided by the same force.

##### Share on other sites

32 minutes ago, Professor G said:

The meter-second is equal to angular momentum divided by force and describes over what distance and how long a given quantity of angular momentum can exert a given force.

m.sec=kg.m^2/sec / kg.m/sec^2

In that regard, 5 meters in one second IS the same as 1 meter for 5 seconds, because both refer to the same angular momentum divided by the same force.

Can you give an example where this would be useful? I can only think of example where more information is needed.

##### Share on other sites

7 hours ago, swansont said:

Can you give an example where this would be useful? I can only think of example where more information is needed.

No, I cannot, sorry. I'd have to give that some thought!

##### Share on other sites

I don't understand the question.

If you make a diagram with meters on the X and seconds on the Y axis, the area of the diagram is meters seconds.

Any point on the diagram has units meters seconds and describes the position of a point upon a line at a specific distance and time. The position of the train from Paris to Brussels at time T.

Edited by michel123456
##### Share on other sites

39 minutes ago, michel123456 said:

I don't understand the question.

If you make a diagram with meters on the X and seconds on the Y axis, the area of the diagram is meters seconds.

But a graph with no data is meaningless.

39 minutes ago, michel123456 said:

Any point on the diagram has units meters seconds and describes the position of a point upon a line at a specific distance and time. The position of the train from Paris to Brussels at time T.

Points on a graph do not have those units.

##### Share on other sites

1 hour ago, swansont said:

But a graph with no data is meaningless.

Points on a graph do not have those units.

What units do they have? In this specific case.

##### Share on other sites

39 minutes ago, michel123456 said:

What units do they have? In this specific case.

metes and seconds. But not meter-seconds.

##### Share on other sites

1 hour ago, swansont said:

metes and seconds. But not meter-seconds.

If the diagram has meters on the X and meters on the Y, the surface represented by the diagram is m2 (square meters). The input on the diagram can have more than one reading. It can be an area, it can be a distance, it can be a coordinate.

If the diagram has other units on the X and Y, the surface will represent the multiplication of the one by the other. And there will be many readings.

Meters and seconds will be a reading as coordinate.

Meters multiplied by seconds will be the area of the diagram. If I am not abused it is a set of coordinates.

What other meters - seconds do you mean?

##### Share on other sites

1 hour ago, michel123456 said:

If the diagram has meters on the X and meters on the Y, the surface represented by the diagram is m2 (square meters). The input on the diagram can have more than one reading. It can be an area, it can be a distance, it can be a coordinate.

A single coordinate (a point on the diagram) in such a situation cannot represent an area.

Quote

If the diagram has other units on the X and Y, the surface will represent the multiplication of the one by the other. And there will be many readings.

Meters and seconds will be a reading as coordinate.

Meters multiplied by seconds will be the area of the diagram. If I am not abused it is a set of coordinates.

What other meters - seconds do you mean?

An area is not a point, and a point is not an area.

If you are at x= 100m, y=100m, that is a location. A point. Not 10000 m^2 (there would be an infinite number of coordinates whose product has that value)

##### Share on other sites

• 1 year later...
On 2/10/2006 at 4:54 PM, zebov said:

velocity, acceleration, jerk, snap etc are all measures of change in there integral, therefore displacement must be a measure of the change of its derivative m*s. when an objects position in space is constant its position in spacetime is however still changing so m*s must be a measure of position in space time and by extension m*s^2 is a measure of acceleration in spacetime etc

Edited by JamesPT

## Create an account

Register a new account