Jump to content

boris_73

Senior Members
  • Posts

    710
  • Joined

  • Last visited

Posts posted by boris_73

  1. is that the level where you have to enter a password or the tricky level if its the tricky level a hint could be compare the other address and see what is different then look at the level 3 address because sometimes it is better to go BACK then forward

     

    or if that doesnt help heres a spolier http://www.dievo.org:82/apprentice/level3/

     

    but if its the level with the password then yes i need help to i have tried to save the swf file but it doesnt seem to work

  2. what your dad lets you do these experiments i have to wait untill they go out before i can do mine but its not that bad dad works away and mums on call so my parents are hardly here, this is an example of how strict my parents are i wanted to do a simple electrolesis when i was about 12-13 years old and to do that i had to beg my parents, then i had to do it outside and away from the house, so now i just wait untill they are out before i do them and heres a thing to remember its much easier to say sorry then it is to ask for permision:))))

  3. what thats it its that easy how much lo-salt should i add to if i had say 50g of sodium perchlorate does'nt it matter say in excess eg 60g also one more thing to make sure i have got rid of all the chlorates will the cristalization process get rid of them all if i do it twice sorry for keep asking all these questions i just want to make sure i have got everything clear before i make it

     

    Edit: do you use the coffee can or coke can as a steel electrode or do you use something else

     

    Edit2: what do you do about the chlorine when you produce 20+ ltrs just leave a bottle of ammonia around

     

    Edit3: and do you have to check the amps as well as the water level every few hours

     

    Edit4: how can you dry either potassium or sodium perchlorate

  4. well that's fine with me so my set up will be in a shed and even if chlorine is produced it wont be near any people and by the time process has finished the chlorine should be in the atmosphere:)))) all i need to know now is what i asked above

    1. will the 5v battery charger be better because it has more current

    2. when i have made sodium perchlorate should i make a solution of sodium perchlorate and lo-salt and use electrolysis to make potassium perchlorate

    3. will 3 days be enough for the reaction to finish

    4. should i still check the amps to get a reading of 8-12 on the carbon rod or is this rubbish

     

    Edit actually ill do it in my garage at least there is a mains supply in there, will there be any problem with the chlorine reacting with any chemicals in the garage or is there not going to be enough chlorine produced to do any damage by. chemicals i mean garden chemicals weed killer ect

  5. bloody hell i thought i would be in the clear now i have to worry about hydrogen and chlorine reacting and exloding to for hydrogen chloride gas the process isnt as simple as its made out to be

     

    Edit: coming to think about it i dont think that much hydrogen will be produced i use to set up an electrolysis set using pencil leads a 9volt battery and two bottles upside down in water and i left it for about 2 hours for some reason i could never produce any hydrogen but i managed to produce a little oxygen this way but it was a very small amount all i can think what went wrong with the hydrogen is that it floated away when i went to ignite it

  6. sorry i know i said ill ask no more questions but anyway :)) should i still be conserned about the chlorine or will a window open be enough and when should i add the lo-salt once i have made sodium perchlorate and then should i a make a solution of sodium perchlorate and lo-salt and electrolise it and this will give me potassium perchlorate if so then that will be good because i can see the differnces between potassium and sodium perchlorate

     

    Edit: which battery charger will work better the 5v or the 10w but the 5v one does have more current then the 10w

  7. i dont know if you have read the edit above but i am using 12g of sodium chloride and 48g of potassium chloride but considering it is harder using a K salt i will use a Na salt so will 60g of Na salt work to get roughly 100g of sodium perchlorate, and will my battery charger be fine for the current i have either 10w one input: 200-240v 135mA 50-60Hz output: 10w or the 5volt one input:100-240v ~ 0.4A 50-60Hz output: 5v= 2A and i will be using 400ml of water will this set up be fine also should i still going to be concernd with the chlorine using this small sorry these are the last things i am going to ask if everything is fine hopefully:))) how long will it take using the 5v battery charger because it has more currents still about 2 days

  8. so will a battery charger with 10w be the right current and what molarity should it be for say 100g then or at least 50g because it mentions if you have a very high concentration of potassium chloride it starts producing more chlorates which i do not want, i am using potassium chloride to make potassium perchlorate because its a better oxidiser ect even though it does take longer to make and is less soluble, and i am 18 im may not exactly a kid and one more thing how is it possible to heat the solution and keep it at say 40c especially with a plastic bucket because even if you used a heat resistant container a very low heat will still go higher then 40c in two days two days a least if i use the correct molarity voltage and heat ect

     

    Edit: i have got 12g of sodium chloride and 48g of potassium chloride for about 100g of potassium perchlorate will this molarity be fine

  9. i am going to make a small amount first i was going to half all of what the instructions said first so i make about 200-250g so that means im only going to use about 1 ltr of liquid just because i said i have a gallon bucket it doesnt mean im going to use a gallon bucket i am using that so the mixture doesnt spil over ect and my sister no longer sleeps in that room she now goes to university and her bedroom is the furthest away from mine other wise i would have done it in the spare room :))) see i am using my brains i dont want to get hurt:))) also buggar on the cat poo and wee i dont think i will try that method so i guess i will just have to leave it damn!

  10. i have a plastic buckect which can hold about a gallon of liquid its square it used to hold lawn feed i was going to do it in that with either a coke can or a paint can as one electrode and get a carbon rod, i was also going to get potassium chloride from low salt, and leave out the potassium chromate, and the charger is i have just had a look input: 200-240 V 135mA 50-60Hz output: 10 W i was going to put the equipment in my sisters room with a window open, but now i am not sure because i dont think i can get hold of ammonia unless if the cat litter will work then i will use that but again will it be able to cope with the amount of chlorine given off

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.