Jump to content

Roger Dynamic Motion

Senior Members
  • Posts

    318
  • Joined

  • Last visited

Everything posted by Roger Dynamic Motion

  1. Question : What are the coordinate vectors responsible for the earth; to spin?.
  2. Posted Today, 04:33 PM John Cuthber, on 29 May 2017 - 4:27 PM, said: how does it occur technically , meaning ; how is the work done ~ is the photons spinning?
  3. does it depend of the frequency of the wave ? and the charge ( Watts).
  4. Yes they exist (pulses)at very high speed ,only when they are excited from a source .
  5. how does it occur technically , meaning ; how is the work done ~ is the photons spinning
  6. Question : what is the unit of heat do they possess. (photons)
  7. Question : What is it ? ~ that we cannot look at light for a long time ?
  8. Light is the propagation of photons in reaction chain ; already existing in space,, witch are being excited from the source of radiation ''the tungsten'from changing sises; from so doing, compressing space '= a compressed wave . .So~ photons cannot exist in a containment .
  9. I would like to add << Doesn't,, Univers? the ever ending word !~for ; all the bodys contained in Space .. If w're looking for an other Univers ,,/ than the word univers do not have any meaning.
  10. If there was more than one; why not infinitly many univers~ and called ~ ""Super Univers''
  11. I would thing !~that today the origine of Motion has been understood. If one claims, that somthing is in motion or moving in space ; I want to know the vectors responsible .
  12. Stil, the body needs to be accelerated at some time if _ it is moving trought space with the ''Cone'' ...in other words <<When is the begining of Motion.?
  13. Your quote _ Where does it say space is flowing toward a mass? It says "the acceleration of free-falling objects is generally not in the direction of this flow "So if a free-falling object is accelerating toward a mass, it means the flow is not.
  14. Well !~ The surface of the water will rise to the opposite side of the acceleration of the bocket at a maximum of 45 dégrée at the first acceleration of 32 ft second <<I think ? And I explain << If the bocket is 6 inches square and contain 2 inches thick of water , and _ the surface of the water is being push down at 32 f second by the Gf.~ and the inertia of the water is being push back from the linear acceleration at 32 f s for the first second _therfore the water will rise of two inches to 4 inches at the opposit side of the acceleration and loose two inches and become 4 inches at the base from the right side of the bocket if the acceleration is to the right ; witch will balance the two forces ~ vertical and horizontal. so the C2 will be 5.66 inches .
  15. There is no force in freefall ? How do you explain the beginning of the acceleration from the start .
  16. How ? can a body be accelerated , without force fallowing. << explaine please ../
  17. Retro causality phenomenon: Continuous Motion can only be achieve with the understanding of the law of Relativity as stated by ? ~no preference frame ; and i explain. On Earth the probleme is that the Earth has more mass than the opposite force ,,,generated from the mechanism of the machine so, its unthinkable to use the Earth as a frame because the earth would have to spin with the other frame, the green frame witch is needed to create an opposite force witch is necessary to achieve continuous motion on earth So!~ what i did ; i have replaced the Earth by creating the blue frame and ''pinned'' the blue axis ,witch I called the world axis but free to rotate at its base with the Earth. So i have a frame replacing the earth that i can prescribe the mass needed accordingly to the opposite frame ''the green frame'' Model shown wire frame. Expansion of Euler rotations; Precession , Rotation , Nutation. Since the mathematics is somewhat complicated, you should read the PD F file on the Gyroscope Precession and Nutation for detailed derivations of these results. The axis of rotation of the body frame, precession axis, is connected to the top with the world, blue frame . All the blue parts are fixed together and move relative to each other . The other frame, the green frame, is called the body frame, representing the rotation around itself,= the moving frame. Here is some of the functions that govern the motion of the systems.The body frame,~ the green frame, contains a MASS at the end of the axis that weight X pounds and that axis is rigidly connected to the precession axis at the bottom and rotate at it's base around the x axis of the green plate (frame) witch frame is free to rotate around the world blue axis as seen from the model. Note that the two frames rotate independently around the same blue axis which is the world axis. Now lets work with gravity. The orange body in the model is raised against gravity with an acceleration 64 FEET (S) by the rotation of the two frames; rotation opposite to each other, with the help of the oscillator bringing the two knobs (the green square and the blue square) of the two frames closer to each other by shrinking time as needed witch is calibrated..til the right amount of acceleration necessary to raise the weight, at 64 feet second is reached beating gravity from so doing.The restoring force is generated by the gravitational forces when the orange body is at is highest and furthers point (position)... from the center of the system and the oscillator at that time is at zero Potential ;...but the mass (weight) is at it's maximum and is forced back down by the G.F. to its original position,from the start so! by so doing, restoring the prescribed potential force of the oscillator...(from stretching back the spring ). That's what makes this concept great. It beets gravity and again, gravity is the restoring force from stretching the oscillator (spring)= ( the potential of the Oscillator) . If you observe at the oscillator, the two FRAMES, work together to raise the weight. When the oscillator forces the green frame to rotate to the right and at the same time the blue frame rotates to the left . The blue frame transfers its motion to the top through the world AXIS (the blue axis) holding the precession AXIS while the green ( frame), rotates to the right raising the mass; so they both conspire to raise the orange body while the green ( frame) is rotating the axis that carry the mass at the same time; so!~ the world axis is free to rotate in the direction of the precession axis with the blue frame. A load, torque clockwise , is applied to the system to slows it down, that demonstrate the torque value of the force of the out put .
  18. link removed Click on Continuous dynamic motion for the information. Continuous Motion can only be achieve with the understanding of the law of Relativity as stated by ? ~no preference frame ; and i explain. On Earth the probleme is that the Earth has more mass than the opposite force ,,,generated from the mechanism of the machine so, its unthinkable to use the Earth as a frame because the earth would have to spin with the other frame, the green frame witch is needed to create an opposite force witch is necessary to achieve continuous motion on earth So!~ what i did ; i have replaced the Earth by creating the blue frame and ''pinned'' the blue axis ,witch I called the world axis but free to rotate at its base with the Earth. So i have a frame replacing the earth that i can prescribe the mass needed accordingly to the opposite frame ''the green frame'' Welcome to the world of ''Roger Dynamic Motion'' on you tube
  19. you have in mind distance .,,,< not time
  20. Why does it ''Gains'' twice as much momentum from reflected light as would an absorbent one.
  21. Very funny , for a person of your categorize. Très drôle, pour une personne de votre catégorie. PoTime sted Today, 02:21 PM Time is the same << that is ; all body, mass, matter, every thing that is contained in a ''systeme with the same axis'' is subject to the same natural laws and all in motion if the systeme is in motion and the time is the same ..to all ,,,from the same axis and that comprehension made it possible to build this machine posted. SO ! it is possible to create an event different in time from one frame to an other one . with 2 frames from different axis.but not parallel axis ; as seen from the model ( important ).
  22. << that is ; all body, mass, matter, every thing that is contained in a ''systeme with the same axis'' is subject to the same natural laws and all in motion if the systeme is in motion and the time is the same ..to all ,,,from the same axis, the World Axis. This forum is not a one way street What I understand is different from you and that made it possible to build this machine Please. let other people the chance to read the post this is speculation not for you to decided . see on google and youtube
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.