Jump to content

Formula for calculating amount needed for target concentration


Recommended Posts

Is there a general formula for determining the amount of solution A, of concentration x%, required to mix with solution B, of concentration y%, to make a solution C that has a final concentration of z%.? A is the stronger stock solution and B needs raising.


As an example, I have a 10% stock solution (Solution A) and I want to raise 150ml of 0.5% solution ( Solution B) to 2% (Solution C).

Link to comment
Share on other sites

A simple substitution of that 10% solution will give you dilution for a new constitution to achieve your resolution of a 2% solution which seems to be the target of your convolution.

 

Can you just simply dilute some of the 10% stock straight down to 2%? It will be easier to work out and quite simple. Otherwise - break it into first principles and do the algebra required to change the 0.5% into a 2% solution. I normally write it out in pencil on a piece of paper listing what I have, what I want and what I need to get there.


PS - I say that diluting some of the 10 % solution might be more accurate as you will be dealing with whole round numbers without having to round off any decimal places. The dilution from 10 to 2 % will be easy with no recurring decimal places to worry about - depends what you need it for I suppose.

Link to comment
Share on other sites

A simple substitution of that 10% solution will give you dilution for a new constitution to achieve your resolution of a 2% solution which seems to be the target of your convolution.

 

Can you just simply dilute some of the 10% stock straight down to 2%? It will be easier to work out and quite simple. Otherwise - break it into first principles and do the algebra required to change the 0.5% into a 2% solution. I normally write it out in pencil on a piece of paper listing what I have, what I want and what I need to get there.

PS - I say that diluting some of the 10 % solution might be more accurate as you will be dealing with whole round numbers without having to round off any decimal places. The dilution from 10 to 2 % will be easy with no recurring decimal places to worry about - depends what you need it for I suppose.

That was just an example. I'm more interested in the principle. The aim is to use the stock to make corrections to a made up flavour recipe gone wrong and correcting one of the components.

Edited by StringJunky
Link to comment
Share on other sites

This is pretty straightforward algebra. If you have a solution of A ml with concentration "a" g/ml and another of B ml of concentration "b" g/ml, then mixing them gives you a total volume of A+B and a total solute mass of Aa+Bb, so your new concentration is (Aa+Bb)/(A+B). If you start with the first and want to add the second to get a final concentration of "c" g/ml, then

 

c = (Aa+Bb)/(A+B)

 

Ac + Bc = Aa + Bb

 

Ac - Aa = Bb - Bc

 

You have both B and b to play with - if you specify B then

 

b = (Ac - Aa - Bc) / B

 

whereas if you specify b then

 

B = (Ac - Aa) / (b - c)

Link to comment
Share on other sites

This is pretty straightforward algebra. If you have a solution of A ml with concentration "a" g/ml and another of B ml of concentration "b" g/ml, then mixing them gives you a total volume of A+B and a total solute mass of Aa+Bb, so your new concentration is (Aa+Bb)/(A+B). If you start with the first and want to add the second to get a final concentration of "c" g/ml, then

 

c = (Aa+Bb)/(A+B)

 

Ac + Bc = Aa + Bb

 

Ac - Aa = Bb - Bc

 

You have both B and b to play with - if you specify B then

 

b = (Ac - Aa - Bc) / B

 

whereas if you specify b then

 

B = (Ac - Aa) / (b - c)

Thanks Kip.

Link to comment
Share on other sites

I guess we could go one better and say we wanted to specify both c and C - then you have

 

C = A + B

 

c = (Aa + Bb) / (A + B)

 

or

 

B = C-A

 

b = (cA + cB - Aa)/B

 

So starting with A of "a" and wanting C of "c", that tells you to add B of "b".

Link to comment
Share on other sites

Yes, I'd add +1 to Kip as well.

 

But I'd also add that Kip's agebra works mass concentrations, useful now that we know we are talking about a food recipe.

You did post this in Inorganic Chemistry where a Chemist might be forgiven for thinking molar concentrations, and why not organic chemistry for food?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.